Download Print this page

HP c8000 Hardware And Software Setup Manual: Monitor Remains Blank When System Is On; You Forgot The Bch Password(s)

Hp c8000: software guide.
Hide thumbs

Advertisement

Monitor Remains Blank When System is On

You Forgot the BCH Password(s)

HP workstation c8000 — Getting Started
NOTE: After you turn on the system, it normally takes about a minute
for text to appear on the monitor.
Make sure...
The monitor power cord
is correctly connected.
The monitor is switched
to ON (LED is on).
The graphics card is
installed and the
monitor (video) cable is
correctly connected.
The monitor's brightness
and contrast settings are
correctly set.
If the system starts and you still have a problem, see
Diagnostics Tools"
on page 4-9.
If you forget your passwords, they can be reset using a jumper on the
system board. See the HP workstation c8000 Technical Reference
Guide.
How
Ensure the power cord is plugged into a
working grounded power outlet and into
the monitor.
Refer to the monitor manual for an
explanation of the LED signals.
Ensure the monitor (video) cable is
properly connected to both the system
and the monitor. Ensure the cable is
connected to the graphics card's
connector.
Check the settings using the on-screen
display or controls on the front of the
monitor.
Troubleshooting
"Software
4–5

Advertisement

Troubleshooting

   Related Manuals for HP c8000

Comments to this Manuals

Symbols: 0
Latest comments: