Vivotek Supreme FE9192-H User Manual page 9

Fisheye network camera

Hide thumbs Also See for Supreme FE9192-H:

Table of Contents

Hardware Reset

The reset button is used to reset the system or restore the factory default settings. Sometimes

resetting the system can return the camera to normal operation. If the system problems remain

after reset, press the reset button longer to restore the factory settings and install again.

Reset: Press and release the recessed reset button with a straightened paper clip. Wait for the

Network Camera to reboot.

Restore: Press and hold the recessed reset button for at least several seconds to restore. Note

that all settings will be restored to factory defaults.

Micro SD/SDHC/SDXC Card Capacity

This network camera is compliant with SD/SDHC/SDXC 16GB / 8GB / 32GB / 64GB / , and up

to 512 / 1024GB and other preceding standard SD cards.

User's Manual - 9