Vivotek Supreme FE9192-H User Manual page 269

© 2020 VIVOTEK INC. All Right Reserved
NAME VALUE
protocol_rtp_multi <boolean>
cast_scalable
protocol_rtp_multi <boolean>
cast_backchannel
protocol_rtp_tcp <boolean>
protocol_rtp_http <boolean>
protocol_spush_mj <boolean>
peg
protocol_snmp <boolean>
protocol_ipv6 <boolean>
protocol_pppoe <boolean>
protocol_ieee8021 <boolean>
x
protocol_qos_cos <boolean>
protocol_qos_dscp <boolean>
protocol_ddns <boolean>
protocol_ftp_serve <positive integer>
r
protocol_ftp_client <positive integer>
videoin_type 0, 1, 2
SECURITY DESCRIPTION
(get/set)
0/7 Indicate whether to support scalable
multicast.
0/7 Indicate whether to support
backchannel multicast.
0/7 Indicate whether to support RTP over
TCP.
0/7 Indicate whether to support RTP over
HTTP.
0/7 Indicate whether to support server
push MJPEG.
0/7 Indicate whether to support SNMP.
0/7 Indicate whether to support IPv6.
0/7 Indicate whether to support PPPoE.
0/7 Indicate whether to support
IEEE802.1x.
0/7 Indicate whether to support CoS.
0/7 Indicate whether to support
QoS/DSCP.
0/7 Indicate whether to support DDNS.
0/7 An 32-bit integer, each bit can be set
separately as follows:
Bit 0 => ftp;
Bit 1=> sftp;
* We support this parameter when
the version number (httpversion) is
equal or greater than 0314a.
0/7 An 32-bit integer, each bit can be set
separately as follows:
Bit 0 => ftp;
Bit 1=> sftp;
* We support this parameter when
the version number (httpversion) is
equal or greater than 0314a.
0/7 0 => Interlaced CCD
VIVOTEK
139
User's Manual - 269