Vivotek Supreme FE9192-H User Manual page 333

© 2020 VIVOTEK INC. All Right Reserved
7.28 Event Setting
Group: event_i<0~(n-1)> n denotes the value of "capability_nevent"
(capability_nevent > 0)
PARAMETER
name
enable
priority
delay
trigger
triggerstatus
VALUE SECURITY
(get/set)
string[40] 6/6
0, 1 6/6
0, 1, 2 6/6
1~999 6/6
boot, 6/6
di,
pir,
motion,
seq,
recnotify,
tampering,
vi,
volalarm,
visignal,
vadp,
smartsd
<product
dependent>
string[40] 6/6
DESCRIPTION
Identification of this entry.
Enable or disable this event.
Indicate the priority of this event:
"0"= low priority
"1"= normal priority
"2"= high priority
Delay in seconds before detecting the
next event.
Indicate the trigger condition:
"boot" = System boot.
"di"= Digital input.
"pir"= PIR detection.
"motion" = Video motion detection.
"seq" = Periodic condition.
"visignal" = Video input signal loss.
"recnotify" = Recording notification.
"tampering" = Tamper detection.
"vi"= Virtual input (Manual trigger).
"volalarm"= Audio detection.
"smartsd"= Lifetime detection of SD card.
"shockalarm" = Shock detection.
"virestore" = Video input signal restore.
"vadp" = VADP trigger.
* "smartsd" is only valid when smart SD
card is inserted
The status for event trigger
VIVOTEK
203
User's Manual - 333