Vivotek Supreme FE9192-H User Manual page 277

© 2020 VIVOTEK INC. All Right Reserved
NAME VALUE
transmission_mod Tx,
e Rx,
Both
network_wire <boolean>
network_wireless <boolean>
network_dualmod <boolean>
e
wireless_s802dot1 <boolean>
1b
wireless_s802dot1 <boolean>
1g
wireless_s802dot1 <boolean>
1n
wireless_begincha 1 ~ 14
nnel
wireless_endchann 1 ~ 14
el
wireless_encrypt_ <boolean>
wep
wireless_encrypt_ <boolean>
wpa
wireless_encrypt_ <boolean>
wpa2
wireless_apmode_ <boolean>
enable
SECURITY DESCRIPTION
(get/set)
tunnel for UART transfer.
0/7 Indicate transmission mode of the
machine: TX = server, Rx = receiver
box, Both = DVR.
0/7 Indicate whether to support Ethernet.
0/7 Indicate whether to support wireless.
0/7 Indicate whether network dual mode
is supported.
* Only available when
"capability_network_wireless" is "1".
* We support this parameter when
the version number (httpversion) is
equal or greater than 0305a.
0/7 Indicate whether to support wireless
802.11b+.
0/7 Indicate whether to support wireless
802.11g.
0/7 Indicate whether to support wireless
802.11n.
0/7 Indicate the begin channel of wireless
network
0/7 Indicate the end channel of wireless
network
0/7 Indicate whether to support wireless
WEP.
0/7 Indicate whether to support wireless
WPA.
0/7 Indicate whether to support wireless
WPA2.
0/7 Indicate whether wireless AP mode is
supported.
* Only available when
"capability_network_wireless" is "1".
* We support this parameter when
the version number (httpversion) is
VIVOTEK
147
User's Manual - 277