Maintenance - Stanley FATMAX SFMCS305 Original Instructions Manual

Maintenance

Your STANLEY FATMAX tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
Regularly clean the ventilation slots in your tool and
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
u
Regularly open the chuck and tap it to remove any dust
u
from the interior.
Protecting the environment
Z
Separate collection. Products and batteries marked
with this symbol must not be disposed of with
normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
Input Voltage
No-load speed
Stroke length
Weight (without battery pack)
Cutting capacity
Wood
Steel
This tool is a Bare unit but can be used with the chargers in
the following table.
Charger SFMCB11
Input Voltage V
AC
Output Voltage V
DC
Current A
SFMCS305
V
DC
Min
-1
mm
kg
mm
mm
SFMCB12 SFMCB14
230 230
18 18
1.25 2
(Original instructions)
This tool is a Bare unit but can be used with the batteries in
the following table.
Battery
Voltage V
DC
Capacity
Ah
Type
Level of sound pressure according to EN62841:
Sound pressure (L
Sound power (L
WA
Vibration total values (triax vector sum) according to EN62841:
Cutting board (a
h, B
Cutting wooden beams (a
EC declaration of conformity
SFMCS305 - Cordless hand held saw
STANLEY FATMAX declares that these products described
under "technical data" are in compliance with:
2006/42/EC, EN62841-1:2015, EN 62841-2-
These products also comply with Directive, 2014/30/EU and
2011/65/EU. For more information, please contact Black &
Decker at the following address or refer to the back of the
18
For more information, please contact STANLEY FATMAX at
0 - 2800
the following address or refer to the back of the manual.
19
The undersigned is responsible for compilation of the technical
1.45
file and makes this declaration on behalf of
90
40
230
18
4
SFMCB201 SFMCB202 SFMCB204
18 18
1.5 2.0
Li-Ion Li-Ion
) at work station 78 dB(A), uncertainty (K) 5 dB(A)
pA
) 89 dB(A), uncertainty (K) 5 dB(A)
) 10.9 m/s , uncertainty (K) 1.5 m/s
2 2
) 10.7 m/s , uncertainty (K) 1.5 m/s
2
h, B
%
MACHINERY DIRECTIVE
11:2016+A1:2020.
manual.
STANLEY FATMAX.
General Manager, Benelux
Egide Walschaertsstraat 14-18
2800 Mechelen, Belgium
ENGLISH
SFMCB206
18 18
4.0 6.0
Li-Ion Li-Ion
2
Patrick Diepenbach
STANLEY FATMAX,
05/20/2022
11