Page 1
AIR CONDITIONER OPERATING MANUAL Duct Type BEDIENUNGSANLEITUNG MODE D’EMPLOI MANUAL DE FUNCIONAMIENTO MANUALE DI ISTRUZIONI ΕΓΧΕΙΡΙΔΙΟ ΛΕΙΤΟΥΡΓΙΑΣ MANUAL DE FUNCIONAMENTO РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ KULLANIM KILAVUZU KEEP THIS MANUAL FOR FUTURE REFERENCE BEWAHREN SIE DIESES HANDBUCH ZUM SPÄTEREN NACHSCHLAGEN AUF CONSERVEZ CE MANUEL POUR RÉFÉRENCE ULTÉRIEURE CONSERVE ESTE MANUAL PARA FUTURA REFERENCIA CONSERVARE IL PRESENTE MANUALE PER FUTURE CONSULTAZIONI [Original instructions]...
OPERATING MANUAL PART No. 9374379705-02 AIR CONDITIONER (DUCT TYPE) CONTENTS SAFETY PRECAUTIONS ........2 WEEKLY TIMER ............9 FEATURES AND FUNCTIONS ....... 3 TEMPERATURE SET BACK TIMER ......11 NAME OF PARTS ........... 4 ECONOMY OPERATION ........12 PREPARATORY OPERATION ........ 5 CLEANING AND CARE .........
FEATURES AND FUNCTIONS ■ Energy saving and Comfortable function ■ Clean function INVERTER REMOVABLE AIR FILTER At the start of operation, large amount of power is used to The indoor unit’s air fi lter can be removed for easy cleaning bring the room quickly to the desired temperature.
PREPARATORY OPERATION Set the current day and time Press the DAY button and select the current day. appears around the selected day. Press the TIMER MODE (CLOCK ADJUST) button for 2 seconds or more. The time indicator on the remote controller will fl ash. Press the SET TIME (<...
OPERATION Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). To start/stop operation Press the START/STOP button. Operation lamp Air conditioner ON: Lit brightly Air conditioner OFF: Not lit To set the operation mode Operation mode setting ●...
Page 7
OPERATION Room temperature sensor selection This function is locked at the factory. In order to detect the room temperature correctly, consult authorized serv- • ice personnel when using this function. Indoor unit Press the ECONOMY button for more than 2 seconds to select whether the room temperature is detected at the indoor unit or the remote controller.
TIMER FUNCTIONS OFF timer (See page 8.) Use this timer function to stop air conditioner operation. The timer operates and air conditioner operation stops after the set time has passed. The timer can be set up to 24 hours in advance. ON timer (See page 8.) Use this timer function to start air conditioner operation.
WEEKLY TIMER Note: In simultaneous multi connection, this function by using the wireless remote controller cannot be used. Weekly timer setting Press the TIMER SET button for Press the TIMER MODE button to select the weekly timer. 2 seconds or more. Day of the week setting ●...
Page 10
WEEKLY TIMER Note: In simultaneous multi connection, this function by using the wireless remote controller cannot be used. WEEKLY timer operation To start To cancel ● ● When the weekly timer is selected, the • Press the TIMER DELETE button to ex.
TEMPERATURE SET BACK TIMER Note: In simultaneous multi connection, this function by using the wireless remote controller cannot be used. Temperature SET BACK timer setting SET BACK If there is no existing SET BACK tempera- ture setting, “- -” will be displayed for the temperature.
ECONOMY OPERATION Begin air conditioner operation before performing this procedure. To Use the ECONOMY Operation Press the ECONOMY button. The ECONOMY indicator will light. ECONOMY operation begins. To Stop the ECONOMY Operation Press the ECONOMY button again. The ECONOMY indicator will go out. Normal operation begins.
TROUBLESHOOTING Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). In following events, immediately stop operation of the air conditioner, and disconnect all the power WARNING supply by turning off the electrical breaker or disconnecting the power plug. Then consult your dealer or authorized service personnel.
Page 14
TROUBLESHOOTING Symptom Problem See Page Water is produced from the During heating operation, water may be produced from the outdoor NORMAL ● outdoor unit: unit due to the automatic defrosting operation. FUNCTION The FILTER indicator blinks: Clean the fi lter. Afterwards, turn the FILTER indicator off. ●...
OPERATING TIPS Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). Heating Performance* Low Ambient Cooling This air conditioner operates on the heat-pump principle, When the outdoor temperature drops, the outdoor unit’s fans ● absorbing heat from outdoor air and transferring that heat may switch to Low Speed, or one of the fans may stop intermit- indoors.
Page 16
OPERATING TIPS Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). Mode Operation AUTO (in COOLING model): When AUTO (automatic changeover) operation fi rst selected, the fan will operate at very low speed for about a few ●...
Page 17
OPERATING TIPS Instructions relating to inverter ( ) are applicable only to “INVERTER MODEL”. ❖ AUTO Restart In Event of Power Interruption Should the power supply to the air conditioner be interrupted Use of other electrical appliances (electric shaver, etc.) or ●...
SELF-DIAGNOSIS When “Er” in temperature indicator is displayed, inspection of the air conditioning system is necessary. Please consult authorized service personnel. Unit number (usually “00”) Error code ex. Self-diagnosis check En-18...
Need help?
Do you have a question about the ACG12UI-MI and is the answer not in the manual?
Questions and answers