Connecting Audio Devices To The Rear Panel - HP Brio 8300 Online Manual

Brio pc
Hide thumbs Also See for Brio 8300:
Table of Contents

Advertisement

Connecting Audio Devices to the Rear Panel

You can connect external speakers, a microphone, or other audio devices to the rear panel. Do not connect headphones
to the jack on the
CD-ROM
drive, as this will only let you hear output from music CDs. Through the rear panel jack on
your computer you will hear sounds from training presentations,
CDs too.
Before connecting any headphones or speakers, always turn the volume down to avoid discomfort from unexpected
Warning
noise or static. Listening to loud sounds for prolonged periods of time may permanently damage your hearing. Before
putting on any headphones, place them around your neck and turn the volume down. Then, put on the headphones
and slowly increase the volume by using the Audio Mixer Applet or the enhanced keyboard until you find a
comfortable listening level, where the sound is clear without being too loud. When you can hear comfortably and
clearly, without distortion, leave the volume control in that position.
Details of what each jack on the sound card is for are given below.
LINE IN
Connect devices such as a cassette, DAT, or Minidisc player for playback and recording.
MICROPHONE
Connect a microphone for voice input.
LINE OUT
Bypass the sound card's internal amplifier to connect powered speakers, an external amplifier for audio
output, a recording device (tape deck), or stereo headphones.
You can use this jack for headphones with limited power output. You can also use it with amplified
speakers which have a dedicated headphone jack for this purpose.
SPEAKERS
Connect speakers for audio output from the card's built-in power amplifier. Adjust the volume from within
the software or from the multimedia control panel if this feature is on your computer.
The SPEAKERS jack is for a highly amplified output and is therefore not suitable for connecting headphones.
Warning
MIDI/GAME
Connect a joystick (for game software) or MIDI instrument. The MIDI port is disabled by default. You will
have to enable this port if you wish to use it with a MIDI.
MIDI
music files, any other audio software, and music
1 About Your Hardware
Your Sound Card
15

Advertisement

Table of Contents
loading

Table of Contents