HP Brio 8300 Online Manual page 47

Installing a Processor Upgrade
The type of processor in your computer depends on which system board you have. Both types of system board are shown
below.
Removing the Old
1 Remove the computer's cover (refer to
Processor
2 On a table top turn the computer on its side, with the system board closest to the surface of the table top.
3 Remove the airflow guide covering the processor: open the retaining clips on top of the airflow guide, slide it back so
that it clears the fan, then lift it out of the computer.
System Board
"Removing the Cover" on page
Processor and
Processor Socket
Retaining
clips
3 Upgrading and Adding Accessories
39).
System Board
Upgrading Hardware
47