Gigabyte S472-Z30 User Manual page 93

5-3-3-1 DDR4 Common Options
Parameter
DDR4 Common Options
Enforce POR
DRAM Controller Configuration Press [Enter] to configure DRAM Controller Configuration.
CAD Bus Configuration
Data Bus Configuration
Common RAS
Security
Phy Configuration
Disable tCCD = 5 read
command spacing
Description
Press [Enter] to configure the Plan of Record (POR) to enable / disable
restrictions for DDR4 frequency and voltage programming. Memory speeds
will be capped at AMD guidelines.
Decline
Š
Accept
Š
– Overclock
» Enable/Disable Memory Overclock Settings
» Options available: Auto, Enabled. Default setting is Auto.
Press [Enter] to configure CAD Bus Configuration.
Press [Enter] to configure Data Bus Configuration.
Press [Enter] to configure Common RAS.
Press [Enter] to configure Security.
Press [Enter] to configure Phy Configuration.
Options available: No, Yes. Default setting is Yes.
BIOS Setup
- 93 -