Table of Contents
Advertisement
Storage
Š 24 x 3.5" SATA/SAS hot-swap HDD/ SSD bays ( Right side & left side)
Š 12 x 2.5" SATA/SAS hot-swap SSD bays ( Front side)
- 4 x 2.5" SATA/SAS/NVMe hybrid hot-swap SSD bays
- 8 x 2.5" NVMe hot-swap SSD bays
Socket
Security
Š 2 x 2.5" SATA hot-swap SSD bays ( Rear side)
Š 1 x Broadcom SAS35x36R expanders
Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port
Š Default configuration supports:
8 x NVMe devices in front side and 2 x SATA in rear side available
Š SAS card is required to enable the drive bays
Š Recommended SAS cards:
Broadcom 9500-16i Tri-Mode Storage Adapter
Broadcom 9560-8i Tri-Mode Storage Adapter
RAID
Š
Expansion Slot
Š Slot_6: 1 x PCIe x16 (Gen4 x16 bus) slot, occupied by CNV3134, 4 x Gen4
NVMe HBA
Security
Socket
Š Slot_5: 1 x PCIe x16 (Gen4 x8 bus) slot
Š Slot_4: 1 x PCIe x16 (Gen4 x16 bus) slot occupied by CNV3134, 4 x Gen4
Security
Socket
NVMe HBA
Š Slot_3: 1 x PCIe x16 (Gen4 x16 bus) slot
Š Slot_2: 1 x PCIe x8 (Gen3 x0 or x8 bus) slot
Š Slot_1: 1 x PCIe x16 (Gen3 x16 or x8 bus) slot; shared with slot_2
Š 1 x OCP 2.0 mezzanine slot with PCIe Gen3 x16 bandwidth (Type1, P1, P2,
P3, P4)
Š 2 x M.2 slots:
- M-key
- PCIe Gen3 x4
- Supports NGFF-2242/2260/2280 cards
Depends on SAS add-on Card
Hardware Installation
- 11 -
Advertisement
Table of Contents
