Gigabyte S472-Z30 User Manual page 57

Parameter
Serial Port 1/2 Configuration
Serial Port
(Note1)
Devices Settings
(Note2)
Change Settings
(Note2)
(Note1) Advanced items prompt when this item is defined.
(Note2) This item appears when Serial Port is set to Enabled.
Description
Enable/Disable the Serial Port (COM). When set to Enabled allows you to
configure the Serial port 1/2 settings. When set to Disabled, displays no
configuration for the serial port.
Options available: Enabled, Disabled. Default setting is Enabled.
Displays the Serial Port 1/2 device settings.
Select an optimal settings for Super IO Device.
Options available for Serial Port 1:
Auto
IO=3F8h; IRQ=4;
IO=3F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;
IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;
IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;
IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;
Default setting is Auto.
Options available for Serial Port 2:
Auto
IO=2F8h; IRQ=3;
IO=3F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;
IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;
IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;
IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;
Default setting is Auto.
BIOS Setup
- 57 -