After withdrawing the front section, push back the middle section into the slide rail assembly. Push the latch and push back the middle section into the
slide rail assembly.
u
P osition the front section against the S12 server and make sure the mounting holes on the front section are
aligned with the locating pins on the side of the server. Assemble the front section onto the S12 series server
and pull back to lock on. (NOTE: Make sure the below fixed bracket is locked on.) Do the same for the other
slide.
Push back the white latch on the front section of the slide rail assembly and simultaneously withdraw the front
Page 1
S12-P10R/S12-P04R/S12-P04S Slide Rails and Rack Installation Instructions Preparing the Slide Rail Assembly Unpack the slide rail assembly. Push back the white latch on the front section of the slide rail assembly and simultaneously withdraw the front Pull the slide rail assembly until section from the slide rail assembly.
Page 2
S12-P10R/S12-P04R/S12-P04S Slide Rails and Rack Installation Instructions Attaching the Slide Rail Assemblies to the Rack u v P osition the slide rail assembly in U nleash the metal clip to lock The front side and rear side assembly methods are the same. Pull the your rack and align the mounting on the rail assembly.
Page 3
S12-P10R/S12-P04R/S12-P04S Slide Rails and Rack Installation Instructions Sliding the S12 Series Server Back into the Rack Pull the blue latch on the middle section of both sides and push the S12 series server back into the rack to complete.