Table of Contents
Advertisement
2-5
Front Panel LEDs and Buttons
• Systems equipped with RoT have different Status LED and ID LED indicators.
See 2-5-1 RoT LEDs to check status.
No.
Name
1.
ID Button
2.
Reset button
Power button
3.
with LED
HDD Status
4.
LED
System
5.
Status LED
LAN 1/2
6.
Active/Link
LEDs
1
6
Color
Status
--
--
Green
On
Green
Blink
N/A
Off
On
Amber
Blink
N/A
On
N/A
Solid On
Solid On
Red
Blink
Green
Solid On
Green
Blink
N/A
Off
System Appearance
- 18 -
2
3
4
5
Description
Press the button to activate system identification
Press this button to reset the system.
Indicates the system is powered on.
System is in ACPI S1 state (sleep mode).
• System is not powered on or in ACPI S5 state
(power off)
• System is in ACPI S4 state (hibernate mode)
Indicates locating the HDD.
Indicates accessing the HDD.
Indicates HDD error.
System is operating normally.
Critical condition, may indicate:
System fan failure; System temperature
Non-critical condition, may indicate:
Redundant power module failure
Temperature and voltage issue
Chassis intrusion
Link between system and network or no access.
Data trasmission or receiving is occuring
No data transmission or receiving is occuring
Advertisement
Table of Contents
