Delay Start/Smartstart - Miele WCD660 WCS Operating Instructions Manual

Delay start
With the Delay start function, you can
delay the start of the programme.
This function is active when the 
SmartGrid programmable function is
switched off.
You can delay the start of a programme
from 30 minutes up to a maximum of
24 hours. This allows you to make use
of night-time economy electricity rates,
for example.
Selecting Delay start
 Select the programme required.
 Touch the  sensor control.

The  sensor control lights up brightly.
 Touch the  or  sensor control
repeatedly until the required Delay
start time appears on the time
display.
- In the case of settings below
10 hours, the Delay start time
changes in increments of 30 minutes
- In the case of settings above
10 hours, the Delay start time
changes in increments of 1 hour

 Delay start/SmartStart

Starting Delay start
 Touch the flashing Start/Add laundry
sensor control.
The Delay start process starts and
counts down on the time display.
Changing or cancelling a started
Delay start
If the selected Delay start function has
started, it is no longer possible to
change the time.
 Turn the programme selector to the
 position.
 Turn the programme selector to any
programme.
Rotating bars ...  ...  or 
are shown on the time display.
The door lock is released.
 Select a programme and a new Delay
start time.
35