Adjusting The Airflow Direction - Daikin Cora FTXV20WVMA Operation Manual

Basic Operation

Adjusting the Airflow Direction

NOTE
Notes on airflow direction setting
• The movable range of the flap varies according to the operation mode.
Note on 3-D airflow
• Using 3-D airflow circulates cold air, which tends to collect at the bottom of the room,
and hot air, which tends to collect near the ceiling, throughout the room, preventing areas of
cold and hot developing.
13
You can adjust the airflow direction to increase your comfort.
CAUTION
• Always use a remote controller to adjust the angles of the flap and louvres.
− If you attempt to move the flap and louvres forcibly by hand when they are swinging, the mechanism
may be damaged.
− Inside the air outlet, a fan is rotating at a high speed.
„ To start auto swing
Up and down airflow direction
Press .
• " " appears on the LCD.
• The flap (horizontal blade) will begin to swing.
Right and left airflow direction
Press .
• " " appears on the LCD.
• The louvres (vertical blades) will begin to swing.
The 3-D airflow direction
Press and
• " " and " " appear on the LCD.
• The flap and louvres move in turn.
• To cancel 3-D airflow, press either
The flap or louvres will stop moving.
„ To set the flap or louvres at the desired position
• This function is effective while the flap or louvres are in auto swing mode.
Press and
reach the desired position.
• In the 3-D airflow, the flap and louvres move in turn.
• " " or " " disappears from the LCD.
.
or again.
when the flap or louvres
Movable range of the flap
COOL / DRY
HEAT
FAN