Advertisement
Step 2
BW15
The gables go on top of the front and
rear walls to support the roof beams.
The gables are packed nested to-
gether and might be mistaken as
1 piece. Carefully separate them
before continuing.
1
Position mid and outer gable
braces on right and left gables.
Short mounting fl ange of brace must
face center of gable. Fasten using
#10-32x7/16" (11 mm) bolts, washers
and square nuts. Assemble 2 sets
of gables.
Step 3
The roof beams join the gables to the
truss and supports the roof panels.
1
Align the holes on 2 roof beams,
back-to-back and fasten using 4
#10-32x7/16" (11 mm) bolts and
square nuts.
Assembled
End
View
Parts Needed For
Gables All Sizes
6381
6380
Short Mounting Flange
Must Face Towards
Center of Gable
Parts Needed For
Roof Beam Assemblies
#10-32x7/16" (11 mm) Bolt
#10-32 Square Nut
7943
Washer
Small Holes
on Top
10462
15
6381 Mid Gable Brace (4)
6380 Outer Gable Brace (4)
7942 Right Gable (2)
7943 Left Gable (2)
7942
#10-32x7/16" (11 mm) Bolt
10462 Roof Beam (2) (All Sizes)
7912 Roof Beam
(2) 12x17 (3,6 m x 5,0 m)
(4) 12x24 (3,6 m x 7,2 m)
(6) 12x31 (3,6 m x 9,4 m)
#10-32 Square Nut
7912
Advertisement
