Table of Contents
Advertisement
2. Press the Enter key. The following screen is displayed.
3. Type the IP address of the TFTP server in the Server IP Address field.
4. Type the port number of the TFTP server you wish to connect to in the Server TFTP
Port Number field.
5. Type the location of the switch module configuration file on the TFTP server in the
Path\Filename field.
6. Highlight APPLY.
7. Press the Enter key to record the IP address and location of the TFTP server.
8. Highlight START.
9. Press the Enter key to initiate the file transfer.
IMPORTANT: To save the configuration settings permanently, you must enter them into NVRAM
using the Save Changes option on the main menu. Refer to the "Saving Changes" section earlier
in this chapter.
NOTE: For additional information, refer to Appendix H, XML Configuration, in the HP ProLiant
e-class C-GbE Interconnect Switch User Guide.
HP ProLiant BL e-Class C-GbE Interconnect Switch Menu-driven Interface Reference Guide
HP CONFIDENTIAL Codename: DeLorean Part Number: 322858-001 Last Saved On: 2/4/03 11:56 AM
Configuring the Switch Modules using the Menu-driven Interface
2-61
Advertisement
Table of Contents
