HP ProLiant C-GbE Reference Manual page 56

Configuring the Switch Modules using the Menu-driven Interface
To configure time settings:
1. Highlight Configure Time on the Configuration menu.
2. Press the Enter key. The following screen is displayed.
The Configure Time screen allows you to configure the current time and date, enable SNTP,
set the SNTP parameters, and set the parameters for daylight saving time.
The screen displays the following:
— Boot Time—The date and time when the switch module was last rebooted
— Current Time—The current date and time (after they have initially been set or
— Time Source—The method in which the switch module gets the current time
Complete the following fields to configure the time information:
— Set Current Time—This field will be grayed out when SNTP is enabled. To
— SNTP—Select Disabled or Enabled. The default is Disabled.
2-46
HP CONFIDENTIAL Codename: DeLorean Part Number: 322858-001 Last Saved On: 2/4/03 11:56 AM
SNTP configured)
information: System Clock, Primary SNTP Server, or Secondary SNTP Server
manually set the current type, enter the following:
— Time—Type the current time in hh:mm:ss format. Leading zeros (0) are not
required.
— Day—Type the first two letters of the current day of the week: Mo, Tu, We, Th,
Fr, Sa, or Su.
— Month—Select the abbreviation for the current month.
— Year—Type the last two digits of the current year.
— SNTP Server Primary—Type the IP address for the primary SNTP server.
— SNTP Server Secondary—Type the IP address for the secondary SNTP server
— SNTP Poll Interval—Type the polling interval (in seconds) for requesting the
time from the server. A number from 30 to 99999 is allowed. The default is 720.
HP ProLiant BL e-Class C-GbE Interconnect Switch Menu-driven Interface Reference Guide