Redundant Power System Socket; Default Settings - 3Com ProCurve E4500-48 Getting Started Manual

20 C 1: I
HAPTER NTRODUCING THE
Redundant Power
System Socket

Default Settings

S 4500 F
WITCH AMILY
AVVERTENZA: Prima di installare o rimuovere qualsiasi componente
dello Switch 4500 Family o di eseguire qualsiasi procedura di
manutenzione, leggere le informazioni di sicurezza riportate
nell'Appendice A di questa guida.
OSTRZEŻENIE: Przed instalacją lub usunięciem jakichkolwiek
elementów z przełącznika z rodziny 4500 lub przeprowadzeniem prac
konserwacyjnych należy zapoznać się z informacjami o bezpieczeństwie
zawartymi w Załączniku A niniejszego podręcznika.
Provides supplemental power for PoE ports (up to 15.4w on all ports) and
redundant power for powered devices and the Switch itself.
Table 5 shows the default settings for the Switch 4500 Family:
Table 5 Default Settings
Feature
Automatic IP Configuration
Port Status
Port Speed
Duplex Mode
Power over Ethernet
Flow Control
Broadcast Storm Control
Virtual LANs (VLANs)
Management VLAN
Link Aggregation Control
Protocol (LACP)
IP Multicast Filtering
Rapid Spanning Tree Protocol Enabled
Fast Start
RMON Alarm
Switch 4500
Enabled
Enabled
Auto-negotiated
Auto-negotiated
Enabled (3CR17571-91 and 3CR17572-91 only)
Auto-negotiated
Enabled
All ports belong to the untagged Default VLAN
(VLAN 1) with IEEE Std 802.1Q-1998 learning
operational
Any VLAN for all units.
Disabled per port
Filtering enabled
Enabled on front panel ports
Enabled