Operation And Important Riding Points; Starting The Engine - Yamaha WR25RK Owner's Manual

Read the Owner's Manual carefully to
become familiar with all controls. If
there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
or injury.

Operation and important riding points

EAU15952
TIP
This model is equipped with:

a lean angle sensor to stop the en-
gine in case of a turnover. In this
EWA10272
case, the display will indicate error
code 30, but this is not a malfunc-
tion. Turn the key to "OFF" and
then to "ON" to clear the error
code. Failing to do so will prevent
the engine from starting even
though the engine will crank when
pushing the start switch.

an engine auto-stop system. The
engine stops automatically if left
idling for 20 minutes. In this case,
the display will indicate error code
70, but this is not a malfunction.
Push the start switch to clear the
error code and to restart the en-
gine.
EAU47152

Starting the engine

In order for the ignition circuit cut-off
system to enable starting, one of the
following conditions must be met:


1. Turn the key to "ON" and make
NOTICE
If a warning light does not come on
initially when the key is turned to
"ON", or if a warning light remains
on, see page 4-2 for the correspond-
6-1
The transmission is in the neutral
position.
The transmission is in gear with
the clutch lever pulled and the sid-
estand up.
See page 4-19 for more informa-
tion.
sure that the engine stop switch is
set to " ".
The following warning
should come on for a few seconds,
then go off.

Fuel level warning light

Coolant temperature warning
light

Engine trouble warning light
EAU45128
1
2
3
4
5
6
7
lights
8
9
ECA15485 10
11
12