Guiding Signals - Optoma E1P2A2F6E1Z1 User Manual

Guiding Signals

Projector
Description
Status
Standby Projector in Standby mode. Ready to
mode power on.
Power on Projector in Normal mode, ready to
display an image.
Projector Air vents might be blocked or ambient
overheated temperature may be above 35 ºC.
The projector automatically shuts
down. Ensure that the air vents are
not blocked and that the ambient
temperature is within operational
range. If the problem persists, contact
us.
Fan One of the fans has failed. The
breakdown projector automatically shuts down. If
the problem persists, contact us.
LED failure LED shutdown.
Note: If there is a fan failure, the TEMP LED will blink amber (2 sec on / 0.5 sec off).
-If the projector fan fails, the projector will automatically shut down. Reset the projector
mode by pressing and holding the Power button for 10 seconds. Please wait for about
5 minutes and try to power up again.
TEMP
Power
Warning
(Blue / Amber)
(Amber)
Amber OFF
Blue OFF
Amber flashing Amber
and Blue ON
Flashing
(Cycling
turn-off
1sec and
turn-on
3sec)
Amber flashing Amber
and Blue ON
Flashing
(Cycling
turn-off
0.5sec and
turn-on
2sec)
OFF OFF
LED
Warning
(Amber)
OFF
OFF
OFF
OFF
Amber
55
English