Optoma E1P2A2F6E1Z1 User Manual page 51

Table of Contents

Advertisement

Note:
- If the first 2 characters of filename are 00~99, the play sequence will start from 00,01,02
until 99.
- If there are two files named "00", the play order will start from the Media file stored in the
microSD card (but the reboot sequence is unchanged). If it is difficult to define the playback
sequence, please change the filename (other than "00").
- If the first two characters of the file name are not numbers (other characters), no sorting is
performed. The order of the files will start from the Media file stored in the microSD card. If
it is difficult to define the play sequence, please change the filename that begins with the
number 00~99.
- In addition, if the microSD card has a combination files of music, photos, and videos, the
playback method is as follows:
1. If there is a video in the file, Signage will only play the video file.
2. If there are photos in the file, Signage will only play photo files.
3. If there are photos and music in the file, Signage will play photo files and play music in
the background.
The play sequence is also depending on the file sorting method.
5. Auto-disable playback info
Due to avoid redundant information for signage application, the system will auto-
disable "playback info window" (pause/start/next/previous/progress bar...) during
signage mode.
6. Error handling
If the system gets an un-supported video file in file list, the system will skip this file.
7. Remote and keypad handling
During "signage mode", touchpad and "Up", "Down", "Left", "Right", "Enter" keys of the
remote control are NOT working. Other keys of the remote control are working.
51
English

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ml1050st+

Table of Contents