Elo TouchSystems Wallaby ELO-STAND-SELF-SERVICE-15-22-FLOOR-TOP4 Assembly Instructions Manual page 13

17
Android or 15"/22" Monitor: Portrait
If using an EMV Cradle, follow those instructions
before proceeding.
Top Portrait
Cable
direction
F o r 2 2 " M o n ito r, it is re c o m m e n d e d to u s e c e n te rin g p la te
(P / N E 6 9 8 2 6 3 ) to c e n te r m o n ito r o n s ta n d . A tta c h c e n te rin g
p la te to 2 2 " m o n ito r b e fo re p ro c e e d in g .
• Add (2) screws from bag "L" to top VESA positions.
Leave ~3mm (1/8") gap for mounting to display bracket.
• Remove cable cover(s) before mounting displays
on stand.
18
Mount i-Series, add (2) screws from bag "L" to bottom VESA positions.
Route power, LAN cables through bottom of stand head. Route
cable or other USB if used.
For monitor, continue to step
For Android skip to step
Add tie-wrap
19
28
© Copyright 2021 Elo Touch Solutions, Inc.
USB Hub
13