Operation Instructions - Hitachi MCE30 Instruction Manual

Operation Instructions

This microwave oven applies modern electronic control to adjust cooking parameters
to meet your needs better for cooking.
1. Clock Setting
When the microwave oven is first plugged in the LED will display "0:00", and the buzzer will
sound once.
1) Press " " to choose 12-hour or 24-hour.
2) Turn " " to adjust the hour figures, the input time should be within 0--23(24-hour)
or 1--12(12-hour).
3) Press " ", the minute figures will flash.
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
5) Press " " to finish clock setting. ":" will flash.
Note: 1) If the clock is not set, time will not count down after it is switched ON.
0:00 is displayed.
2) When setting the clock, if you press "
previous status automatically.The setting will be cancelled.
2. Microwave Cooking
Press " " once. "P100" displays. Press the same key repeatedly or turn "
to choose different microwave power, and "P100, P80,P50, P30, P10" will be
displayed in order. Press "
cooking time (up to 95 minutes).
Press " " to start cooking.
Example:
If you want to use 50% power to cook for 20 minutes, you can operate
the oven as the following steps.
1) Keep pressing "
2) Press " " to confirm.
3) Turn " " to adjust the cooking time till the oven displays "20:00".
4) Press " " to start cooking.
GB
" to confirm. Then turn "
" till "P50" displays.
", the oven will go back to the
10
" to adjust the
"