HP E5412 ZL Datasheet page 14

HP E5400 zl Switch Series
Specifications (continued)
Included accessories
Ports
Power supplies
Physical characteristics
Dimensions
Weight
Memory and processor
Gigabit Module
10G Module
Management Module
Mounting
Performance
1000 Mb Latency
10 Gbps Latency
Throughput
Routing/Switching capacity
Switch fabric speed
Routing table size
MAC address table size
Environment
Operating temperature
Operating relative humidity
Nonoperating/Storage temperature
Nonoperating/Storage relative humidity
Altitude
Acoustic
Electrical characteristics
Description
Maximum heat dissipation
Voltage
Idle power
Frequency
Notes
Safety
Emissions
Immunity
EN
ESD
Radiated
EFT/Burst
HP E5406-44G-PoE+/4SFP zl Switch (J9447A)
1 HP ProCurve 24-Port 10/100/1000 PoE+ zl Module (J9307A)
1 HP ProCurve 20-Port 10/100/1000 PoE+ and 4-Port Mini-GBIC zl Module
(J9308A)
1 HP ProCurve 1500W PoE+ zl Power Supply (J9306A)
44 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE
802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T); Media Type:
Auto-MDIX; Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
4 open mini-GBIC slots
4 open module slots
Supports a maximum of 16 10-GbE ports or 140 autosensing 10/100/1000
ports or 100 mini-GBICs, or a combination
1 power-supply slots
includes: 1 x J9306AHP 1500 W PoE+ zl Power Supply
17.75(d) x 17.5(w) x 6.9(h) in. (45.09 x 44.45 x 17.53 cm) (4U height)
34.9 lb. (15.83 kg)
ARM9 @ 200 MHz; packet buffer size: 144 Mb QDR SDRAM
ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM
Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB compact flash,
256 MB DDR SDRAM
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
< 3.7 µs (FIFO 64-byte packets)
< 2.1 µs (FIFO 64-byte packets)
up to 282.1 million pps
379.2 Gbps
379.2 Gbps
10,000 entries
64,000 entries
32°F to 131°F (0°C to 55°C); 0°C to 40°C with J8706A or J8707A modules
installed
15% to 95% @ 131°F (55°C), noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 95% @ 149°F (65°C), noncondensing
up to 10,000 ft. (3 km)
Power: 57 dB, Pressure: 40.2 dB ISO 7779, ISO 9296
One J9306A installed. One open power supply slot is available; three different
power supplies are available. See power supply products for additional
specifications.
2450 BTU/hr (2584.75 kJ/hr), (max. non-PoE); 3700 BTU/hr (3903 kJ/hr)
(max. using PoE)
110-127 / 200-240 VAC
215 W
50 / 60 Hz
Idle power is the actual power consumption of the device with no ports
connected.
Heat dissipation does not include heat dissipated by the PoE-powered devices
themselves.
CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950
FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A
EN 55024, CISPR 24
IEC 61000-4-2; 4 kV CD, 8 kV AD
IEC 61000-4-3; 3 V/m
IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)
HP E5412-92G-PoE+/4SFP zl Switch (J9448A)
3 HP ProCurve 24-Port 10/100/1000 PoE+ zl Module (J9307A)
1 HP ProCurve 20-Port 10/100/1000 PoE+ and 4-Port Mini-GBIC zl Module
(J9308A)
2 HP ProCurve 1500W PoE+ zl Power Supply (J9306A)
92 autosensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u
Type 100Base-TX, IEEE 802.3ab Type 1000Base-T); Media Type: Auto-MDIX;
Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
4 open mini-GBIC slots
8 open module slots
Supports a maximum of 32 10-GbE ports or 284 autosensing 10/100/1000
ports or 196 mini-GBICs, or a combination
2 power-supply slots
includes: 2 x J9306AHP 1500 W PoE+ zl Power Supply
17.75(d) x 17.5(w) x 12.1(h) in. (45.09 x 44.45 x 30.73 cm) (7U height)
58.18 lb. (26.39 kg)
ARM9 @ 200 MHz; packet buffer size: 144 Mb QDR SDRAM
ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM
Freescale PowerPC 8540 @ 666 MHz, 4 MB flash Mb, 128 MB compact flash,
256 MB DDR SDRAM
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
< 3.7 µs (FIFO 64-byte packets)
< 2.1 µs (FIFO 64-byte packets)
up to 564.2 million pps
758.4 Gbps
758.4 Gbps
10,000 entries
64,000 entries
32°F to 131°F (0°C to 55°C); 0°C to 40°C with J8706A or J8707A modules
installed
15% to 95% @ 131°F (55°C), noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 95% @ 149°F (65°C), noncondensing
up to 10,000 ft. (3 km)
Power: 64 dB, Pressure: 57.5 dB ISO 7779, ISO 9296
Two J9306A installed. Two open power supply slots are available; three
different power supplies are available. See power supply products for
additional specifications.
4900 BTU/hr (5169.5 kJ/hr), (max. non-PoE); 7400 BTU/hr (7807 kJ/hr)
(max. using PoE)
110-127 / 200-240 VAC
312 W
50 / 60 Hz
Idle power is the actual power consumption of the device with no ports
connected.
Heat dissipation does not include heat dissipated by the PoE-powered devices
themselves.
CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950
FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A
EN 55024, CISPR 24
IEC 61000-4-2; 4 kV CD, 8 kV AD
IEC 61000-4-3; 3 V/m
IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)
14