Pedal Unit Jack; Expression/Assignable Jack - Casio PX-S3100BK User Manual

Overview and Setup

PEDAL UNIT jack

Use the cs PEDAL UNIT jack to connect a separately
available Pedal Unit (SP-34). You can then use the pedals for
expression that is similar to that available on an acoustic
piano.
■ SP-34 Pedal Functions
● Damper Pedal
Pressing the damper pedal while playing will cause the notes
you play to reverberate. The SP-34 pedal also supports half-
pedal operation, so pressing the pedal part way applies only a
partial damper effect.
● Soft Pedal
Pressing this pedal suppresses notes played on the keyboard
after the pedal was pressed, and makes them sound softer.
● Sostenuto Pedal
Only the notes of the keys that are depressed when this pedal
is pressed are sustained, even if the keyboard keys are
released, until the pedal is released.
Soft Pedal
Sostenuto Pedal
EN-8
Damper Pedal

EXPRESSION/ASSIGNABLE Jack

Use the dl EXPRESSION/ASSIGNABLE jack to connect a
commercially available expression pedal or a CASIO sustain
pedal (included SP-3 or separately available pedal).
Perform one of the operations below depending on the pedal
that is being connected.
For this type
Perform this operation:
of pedal:
Switch type (1) Use the procedure under
pedal pedal
(2) Use the procedure under
pedal
switch type pedal setting.
Expression (1) Use the procedure under
pedal pedal
polarity type that matches the pedal
being connected.
(2) Use the procedure under
pedal
expression pedal setting.
(3) Perform the procedure under
"Expression Pedal
EN-9).
■ Connectable Expression Pedals
• Maximum resistance value: 10kΩ±20% to 50kΩ±20%
• Use of a pedal whose operation has been confirmed (see
below) is recommended.
Operation Confirmed Pedals (Polarity Type 2)
Roland EV-5 (Set minimum volume to 0.)
KURZWEIL CC-1
FATAR VP-25, VP-26
"To specify the
type" (page EN-9) to select "SW".
"To specify the
function" (page EN-9) to select a
"To specify the
type" (page EN-9) to select a
"To specify the
function" (page EN-9) to select an
Calibration" (page