Table of Contents
Advertisement
USB Flash Drive and USB Type A
Port Handling Precautions
• Be sure to observe the precautions provided in the
documentation that comes with the USB flash drive.
• Avoid using a USB flash drive under the conditions
below. Such conditions can corrupt data stored on the
USB flash drive.
− Areas subjected to high temperature, high humidity,
or corrosive gas
− Areas subjected to strong electrostatic charge and
digital noise
• Never remove the USB flash drive while data is being
written to or loaded from it. Doing so can corrupt the
data on the USB flash drive and damage the cq USB
Type A port.
• A USB flash drive can become warm after very long
use. This is normal and does not indicate malfunction.
• Static electricity conducted to the cq USB Type A port
from your hand or from a USB flash drive can cause
malfunction of the Digital Piano. If this happens, turn
the Digital Piano off and then back on again.
Copyrights
You are allowed to use recordings for your own personal
use. Any reproduction of an audio or music format file,
without the permission of its copyright holder, is strictly
prohibited under copyright laws and international
treaties. Also, making such files available on the Internet
or distributing them to third parties, regardless of
whether such activities are conducted with or without
compensation, is strictly prohibited under copyright laws
and international treaties. CASIO COMPUTER CO.,
LTD. shall not be held in any way liable for any use of
this Digital Piano that is illegal under copyright laws.
Connecting a USB Flash Drive to
and Detaching It from the Digital
Piano
• When you perform a USB flash drive operation or turn
on the Digital Piano while a USB flash drive is plugged
in, the Digital Piano initially needs to perform a
"mounting" sequence to prepare for data exchange
with the USB flash drive. Digital Piano operations may
be momentarily disabled while a mounting sequence is
being performed. The message "MOUNTING" is
displayed while the USB flash drive is being mounted.
It may take up to 10 or 20 seconds or even longer for a
USB flash drive to be mounted. Do not attempt to
perform any operation on the Digital Piano while a
mounting sequence is in progress. A USB flash drive
needs to be mounted each time it is connected to the
Digital Piano.
• Mounting a USB flash drive on the Digital Piano will create
a folder named MUSICDAT in the drive's root directory if a
MUSICDAT folder does not already exist there. Use this
folder when exchanging data between the Digital Piano and
USB flash drive.
■ To connect a USB flash drive
1.
As shown in the illustration below, insert the
USB flash drive into the Digital Piano's cq USB
Type A port.
USB flash drive
• Carefully push the USB flash drive in as far as it will
go. Do not use undue force when inserting the USB
flash drive.
■ To disconnect a USB flash drive
1.
After checking to make sure that the message
"MOUNTING" or "Wait" is not on the display
(indicating a read or write operation being
performed), pull the USB flash drive straight
out of the cq USB Type A port.
USB Flash Drive
cq USB Type A port
EN-61
Advertisement
Table of Contents
