Midea WQP6-3602F Instruction Manual page 25

Problem
Cloudiness on
glassware.
Black or grey
marks on dishes
Detergent left in
dispenser cups
The dishes are
not drying
Possible Causes
Combination of soft
water and too much
detergent.
Aluminium utensils
have rubbed against
dishes
Dishes block detergent
dispenser cups
Improper loading
Dishes are removed
too soon
Wrong program has
been selected.
Use of cutlery with a
low-quality coating.
25
What To Do
Use less detergent if you have soft
water and select a shorter cycle to
wash the glassware and to get
them clean.
Use a mild abrasive cleaner to
eliminate those marks.
Re-loading the dishes properly.
Load the dishwasher as suggested in
the directions.
Do not empty your dishwasher
immediately after washing. Open the
door slightly so that the steam can
escape. Begin unloading the dishwasher
only once the dishes are barely warm
to the touch. Empty the low basket
first. This prevents water form dropping
off dishes in the upper basket.
In short programmes the washing
temperature is lower. This also lowers
cleaning performance. Choose a
programme with a long washing time.
Water drainage is more difficult with
these items. Cutlery or dishes of this
type are not suitable for washing in
the dishwasher.