Table of Contents
Advertisement
7
Handling the camera
You can connect the camera to a computer, using a USB-C to USB-A or a USB-C to
USB-C cable. Once connected, you can move the image and video files from the memo-
ry card to the computer.
To move files to a computer via USB cable, do the following:
1. Open the cover for the connector compartment at the bottom of the camera.
2. Connect a USB cable to the USB-C connector in the connector bay. Connect the oth-
er end of the USB cable to the computer.
3. Turn on the camera.
4. Do one of the following:
• Move the files to the computer using a drag-and-drop operation.
Note Moving a file using a drag-and-drop operation does not delete the file in
the camera.
• Import the images into a FLIR Thermography software.
Note When closing the cover for the connector compartment, firmly press along the
edges of the cover to make sure that it closes tightly.
7.11.1 Related topics
You can also set up the camera to upload images and videos for storage online, see sec-
tion 9 Cloud connectivity, page 44.
7.12 Programmable buttons
There are two individually programmable buttons: one above the screen and one at the
bottom of the optics housing.
#T810413; r. AF/83467/83910; en-US
29
Advertisement
Table of Contents
