BenQ LU935 User Manual page 42

Network
Wired LAN See
AMX Device When this function is On, the projector can be detected by AMX controller.
Discovery
MAC Address Displays the mac address for this projector.
(Wired)
Settings
Projector The projector can be installed on a ceiling or behind a screen, or with one or more
mirrors. See
Installation
Remote Allows you to enable all the remote receivers or one specific remote receiver on
the projector.
Receiver
Auto Source Allows the projector to automatically search for a signal.
Search
• On: Allows the projector to automatically determines the best picture timings for
the displayed image when PC signal (analog RGB) is selected and AUTO is
Auto Sync
pressed.
• Off: The projector will not respond when AUTO is pressed.
Dynamic Allows the projector to automatically detect the video content and enhance
contrast during dark scenes.
Dimming
• Light Mode: See
• Custom Brightness: Only available when Light Mode is Custom.
Light Settings
• Light Usage Time: Displays the number of hours the light source has been
used.
42 Menu operation
Controlling the projector through a Wired LAN environment on page
Choosing a location on page
Setting the Light Mode on page
11.
48.
25.