Skipping Tracks (S-Cps); Playing A Track Repeatedly; Sampling All The Tracks On A Cassette (Scan) - Blaupunkt Oregon DJ71 Operating Instructions Manual

Skipping tracks (S-CPS)

To select the next or some other track,
button, 7, one or more
press the
times, until the number of tracks to be
skipped appears on the display behind
"CPS FF".
"CPS FF" and the number of tracks to be
skipped appear on the display. The tape winds
fast forwards to the corresponding following
track.
In order to select the previous track,
button, 7, one or more
press the
times, until the number of tracks to be
skipped appears on the display behind
"CPS FR".
"CPS FR" and the number of tracks to be
skipped appear on the display. The tape is
fast rewound to the start of the present track
or of the appropriate previous track.

Playing a track repeatedly

Press the softkey, 4, indicating "RPT".
The present track is repeated. "RPT ON" ap-
pears for a short time on the display, and RPT
is displayed with light and shade reversed.
While the tape is being rewound after the end
of the track, "REWIND" appears in the dis-
play.
To stop repeating the track,
press the softkey, 4, indicating "RPT"
again.
Play continues as normal.
"RPT OFF" is shown on the display for a short
time.
CASSETTE OPERATION
Sampling all the tracks on a
cassette (SCAN)
Press the softkey, 4, indicating "SCA".
Samples from all the tracks on the tape are
played in ascending order.
In order to stop sampling the tracks,
press the softkey, 4, indicating "SCA"
again.
The track that is currently being sampled will
continue to be played.
Note:
The duration of the samples can be ad-
justed. Refer to the section on "Adjusting
the Sample Duration" in the "Radio Op-
eration" section.
There must be a pause of at least three
seconds between each of the tracks on
the cassette in order to use the S-CPS,
RPT and SCAN functions.
49