Cassette Operation; Cassette Play; Cassette Ejection; Changing The Direction Of Play - Blaupunkt PALM BEACH Palm Beach C51 Operating Instructions Manual

If there is no cassette in the device
button, 9.
press the
The flip-release panel opens to the front.
Insert the cassette into the cassette
slot with the open side to the right.
Close the control unit.
The cassette starts playing with the side
that is facing upwards.
If there is already a cassette in the
device
Press the CD•C button, @, as
often as is necessary for
"CASSETTE" to appear in the dis-
play.
The cassette is played in whichever di-
rection was last selected.
Press the
The flip-release panel opens to the front
and the cassette is ejected.
Remove the cassette and close the
release panel
or
insert a new cassette.
To change between the directions
of play for side A and side B, press
button, >.
the 2
Note:
The direction of play is automatical-
ly reversed at the end of the tape
(auto-reverse).
44
button, 9.
In order to change to a later track,
button, :, one or
press the
more times.
"CPS FF" and the number of tracks to
be skipped appear on the display.
The tape winds fast forwards to the next
track, or the chosen later track.
In order to change one of the previ-
ous tracks, press the
one or more times.
"CPS FR" and the number of tracks to
be skipped appear on the display.
The tape is fast rewound to the start of
the present track or of the appropriate
previous track.
Press the 4 RPT button, >.
The present track is repeated. RPT illu-
minates on the display. While the tape
is being rewound after the end of the
track, "REPEAT TRCK" appears in the
display.
To stop repeating the track, press
the 4 RPT button, >, again.
Play continues as normal. RPT on the
display goes out.
Hold down the OK button, ;, for
longer than two seconds.
"CAS SCAN" appears in the display.
Samples from all the tracks on the tape
are played in ascending order.
To halt the scan, press the OK but-
ton, ;, a second time.
button, :,