Download Print this page
Hobo S-LIA-M003 Manual

Hobo S-LIA-M003 Manual

Photosynthetically active radiation smart sensor

Advertisement

Quick Links

Photosynthetically Active Radiation (PAR)
Smart Sensor (S-LIA-M003) Manual
PAR Smart Sensor
S-LIA-M003
Accessories:
• Light sensor mounting
bracket (M-LBB)
• Light sensor level (M-LLA)
5942-H
1.800.561.8187
The photosynthetically active radiation (PAR) smart sensor is designed to work with HOBO®
stations. The smart sensor has a plug-in modular connector that allows it to be added easily to a
station. All calibration parameters are stored inside the smart sensor, which automatically
communicates configuration information to the logger without any programming, calibration, or
extensive user setup.
Specifications
Measurement Range
Accuracy
Angular Accuracy
Resolution
Drift
Operating Temperature Range
Environmental Rating
Housing
Dimensions
Weight
Bits per Sample
Number of Data Channels*
Measurement Averaging Option
Cable Length Available
Length of Smart Sensor
Network Cable*
* A single HOBO station can accommodate 15 data channels and up to 100 m (328 ft) of smart sensor cable (the digital
communications portion of the sensor cables).
Typical Quantum Response
The PAR smart sensor is designed to detect photons between 400-700 nm in wavelength. Ideally
the sensor would count photons with equal efficiency between 400-700 nm and no photons
would be counted outside this range. However, in reality, this sensor undercounts photons
between 400-550 nm and between 670-700 nm, and it over counts photons between 550-670 nm.
In most applications (where the sensor is used in natural sunlight) the error is not significant.
Plot A: PAR Smart Sensor Typical Quantum Response
www.
.com
0 to 2500 µmol/m
/sec, wavelengths 400 to 700 nm (see Plot A)
2
±5 µmol/m
/sec or ± 5%, whichever is greater in sunlight; Additional
2
temperature induced error ±0.75 µmol/m
(0.42 µmol/m
2
/sec/°F from 77°F)
Cosine corrected 0 to 80 degrees from vertical; Azimuth Error <2%
error at 45 degrees from vertical, 360 degree rotation
2.5 µmol/m
/sec
2
< ±2% per year
-40° to 75°C (-40° to 167°F)
Weatherproof
Anodized aluminum housing with acrylic diffuser and O-ring seal
4.1 cm height x 3.2 cm diameter (1 5/8 x 1 1/4 in)
120 g (4 oz)
10
1
Yes
3.0 m (9.8 ft)
3.0 m (9.8 ft)
The CE Marking identifies this product as complying with all relevant
directives in the European Union (EU).
information@itm.com
/sec/°C from 25°C
2

Advertisement

loading

Summary of Contents for Hobo S-LIA-M003

  • Page 1 The CE Marking identifies this product as complying with all relevant directives in the European Union (EU). * A single HOBO station can accommodate 15 data channels and up to 100 m (328 ft) of smart sensor cable (the digital communications portion of the sensor cables).
  • Page 2 PAR Smart Sensor (S-LIA-M003) Manual Mounting 10. Check the light sensor level and repeat above steps if necessary. 11. When the light sensor is level, remove the light sensor level Bracket Mounting from the light sensor. It is recommended that you mount the PAR smart sensor with the light sensor mounting bracket (M-LBB) on a pole or tripod.
  • Page 3 HOBOlink to 1 minute and Save. 3. Press the Connect button on the station. © 2001–2020 Onset Computer Corporation. All rights reserved. Onset and HOBO are trademarks or registered trademarks of Onset Computer Corporation. All other trademarks are the property of their respective companies.