Table of Contents
Advertisement
Figure 1: Terminal setup diagram
A terminal program is required to make the software connection to the GE-DS-
242-PoE Managed Switch. Windows' Hyper Terminal program is a good choice.
The Hyper Terminal program can be accessed from the Start menu.
1. Click START, then Programs/Accessories and then Hyper Terminal.
2. When the following screen appears, make sure that the COM port is
configured as:
•
Baud
: 57600
•
Parity
: None
•
Data bits
: 8
•
Stop bits
: 1
•
Flow Control : None
Figure 2: COM1 properties window
P/N 1069668 • REV 1.0 • ISS 22FEB10
All manuals and user guides at all-guides.com
3 of 10
Advertisement
Table of Contents
