Table of Contents
Advertisement
8
Before first use
BEFORE FIRST USE
WARNING!
Refer to "Safety information" chapter.
Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Refer to chapter "Care and Cleaning".
Setting the time
The oven only operates after time set.
When you connect the appliance to the electrical supply or in case of a power cut, the Time
function indicator flashes automatically.
To set the current time use the
After approximately 5 seconds, the flashing stops and the display shows the time of day set.
You can only change the Time of day
• the switch-on lock is not on
• none of the clock functions Duration
• no oven function is set.
Pre-heating
1.
Set function
2.
Let the appliance operate without the food for approximately 1 hour.
3.
Set function
4.
Let the appliance operate without the food for approximately 10 minutes.
5.
Set function
6.
Let the appliance operate without the food for approximately 10 minutes.
This is to burn off the residue in the appliance. The accessories can become more hot than
usually. When you pre-heat the appliance for the first time, the appliance can make an
odour and smoke. This is the usual effect. Make sure the airflow is sufficient.
or
button.
and maximum temperature.
and maximum temperature.
and maximum temperature.
if :
or End
is set
Advertisement
Table of Contents
