Check that printer is selected as connection for various devices (e.g.
Check4
computer/smartphone/tablet).
Select the network name (SSID) for Wireless Direct specified for the printer as the connection destination for
devices.
Check the destination on your device.
For details, refer to your device's instruction manual or visit the manufacturer's website.
To check the network name (SSID) for Wireless Direct specified for the printer, display it using the operation
panel of the printer or print out the network settings information of the printer.
•
• Display on the LCD.
LAN settings
• Print the network settings.
•
Printing Network Settings
Check that Wireless Direct password set for printer is entered correctly.
Check5
To check the password specified for the printer, display it using the operation panel of the printer or print out
the network settings information of the printer.
•
• Display on the LCD.
LAN settings
•
• Print the network settings.
Printing Network Settings
Check that printer is not placed too far away from device.
Check6
If the distance between the printer and the device is too far, wireless communication becomes poor. Place the
printer and the device close to each other.
Note
• Wireless Direct is set to disabled when you connect to and use an EAP router. Also, if you set
•
Wireless Direct to enable in this case, the wireless LAN (Wi-Fi) will be set to Disable.
• When using IEEE802.1X/EAP (WPA/WPA2 Enterprise), enable the Administrator mode so that the
•
Wireless Direct settings cannot be changed.
• When using a 5 GHz infrastructure connection, the Wireless Direct setting is disabled.
•
306