Canon MAXIFY GX5050 Online Manual page 186

• IPP settings •
Selecting Enable allows you to print via the network with the IPP protocol.
• • DRX setting
Enables discontinuous reception (discontinuous data reception).
◦ ◦ Wi-Fi
Selecting Enable allows you to activate discontinuous reception when using Wi-Fi.
◦ ◦ Wired LAN
Selecting Enable allows you to activate discontinuous reception when the printer is connected
to a device compatible with wired LAN. Power consumption can be reduced by discontinuous
reception.
Note
• • Depending on the router used, discontinuous reception may not be activated even though
Enable is selected.
• • Discontinuous reception is enabled only while the printer is on standby. (The LCD is in the screen
saver mode.)
• • IPsec settings
Selecting Enable allows you to specify the IPsec settings.
• IEEE802.1X/EAP •
Setting item when you use IEEE802.1X/EAP (WPA/WPA2 Enterprise).
◦ Enable/disable ◦
Enables/disables IEEE802.1X/EAP.
◦ EAP router search ◦
Searches switch/access point of IEEE802.1X/EAP and display it.
◦ ◦ Latest auth. result
Displays the latest authentication result of IEEE802.1X/EAP setting.
186