ENGLISH (Original instructions) Intended use Your Stanley Fat Max SFMCF920 impact wrench has been designed for impact fastening applications. This appliance is intended for professional and private, non professional users. General power tool safety warnings Warning! Read all safety warnings,...
Page 5
(Original instructions) ENGLISH 3. Personal safety Power tools are dangerous in the hands of untrained a. Stay alert, watch what you are doing and use common users. sense when operating a power tool. e. Maintain power tools and accessories. Check for Do not use a power tool while you are tired or under misalignment or binding of moving parts, breakage of the influence of drugs, alcohol or medication.
Health hazards caused by breathing dust developed when Chargers using your tool (example:- working with wood, especially Use your Stanley Fat Max charger only to charge the bat- oak, beech and MDF.) tery in the tool with which it was supplied. Other batteries...
Page 7
Fully Charged: If the supply cord is damaged, it must be replaced by the Green LED Solid manufacturer or an authorised Stanley Fat Max Service Centre in order to avoid a hazard. Hot/Cold Pack Delay: Features Green LED Intermittent This appliance includes some or all of the following features.
Page 8
Bolt size: Larger bolt diameters generally require available. higher fastening torque. Fastening torque will also vary Please visit our website www.stanley.eu/3 for further according to length, grade, and torque coefficient. information. Bolt: Ensure that all threads are free of rust and other debris to allow proper fastening torque.
Maintenance Charger SFMCB11 SFMCB12 SFMCB14 Your Stanley Fat Max tool has been designed to operate Input Voltage over a long period of time with a minimum of maintenance. Output Voltage Continuous satisfactory operation depends upon proper tool care and regular cleaning.
EN62841-1:2015, EN62841-2-2: 2014. These products also comply with Directive 2006/42/EC, 2014/30/EU and 2011/65/EU. For more information, please contact STANLEY FATMAX at the following address or refer to the back of the manual. For more information, please contact STANLEY FATMAX at the following address or refer to the back of the manual.
Page 12
ENGLISH (Original instructions) Australia & New Zealand Stanley Black & Decker www.stanleytools.com.au www.stanleytools.co.nz Tel.1800 338 002 (Aust) or Tel. 0800 339 258 (NZ) 810 Whitehorse Road Box Hill VIC 3128, Australia NA107712 09/2021...
Need help?
Do you have a question about the FATMAX SFMCF920B and is the answer not in the manual?
Questions and answers