Table of Contents
Advertisement
Fastening time: Longer fastening time results in
u
increased fastening torque. Using a longer fastening
time than recommended could cause the fasteners
to be overstressed, stripped or damaged.
LED work lights
The worklight (6) is activated when the trigger switch is
depressed, and will automatically turn off 20 seconds after
the trigger switch is released. If the trigger switch remains
depressed, the worklight will remain on.
Note: The worklights are for lighting the immediate work
surface and are not intended to be used as a flashlight.
Maintenance
Your Stanley Fat Max tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
Regularly clean the ventilation slots in your tool and
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
(Original instructions)
Technical data
Voltage
No-load speed
Beats
Max. torque (PTI Method)
Anvil Size
Weight
Charger
SFMCB11
Input Voltage
V
AC
Output Voltage
V
DC
Current
A
SFMCB201
Battery
18
Voltage
V
DC
1.5
Capacity
Ah
Li-Ion
Type
Level of sound pressure according to EN 62841:
Sound pressure (L
) 95 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L
) 106 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 62841:
Drilling into metal (a
) 11.4 m/s
h, D
ENGLISH
SFMCF920
V
DC
0 - 900 / 1900
-1
Min
BPM
Nm
1/2" (13mm)
inches
kg
SFMCB12
230
230
18
18
1.25
2
SFMCB202
SFMCB204
SFMCB206
18
18
2.0
4.0
Li-Ion
Li-Ion
2
2
, uncertainty (K) 1.5 m/s
18V
0-3100
370
1.6
SFMCB14
230
18
4
18
6.0
Li-Ion
9
Advertisement
Table of Contents
