Roland KD-140 Owner's Manual page 7

Connecting to a Sound Module
Use the connection cable to connect the KD-140 to your
percussion sound module (e.g., TD-20X).
Connect the L-shaped plug of the cable to the KD-140's
OUTPUT jack.
Make sure KD-140 does not touch the drum stand or other
pads.
To prevent malfunction and/or damage to speakers or
other devices, always turn down the volume, and turn
off the power on all devices before making any
connections.
fig.18-2-e.eps
Example: Percussion Sound Module TD-20X
L-shaped plug
I-shaped
plug
OUTPUT jack
Recommended Percussion Sound
Module Parameter Settings
Below you will find recommended trigger parameters when
using the KD-140 with various sound modules.
You may need to adjust trigger parameters depending on
your playing style and playing environment.
TD-20X/TDW-20
Trigger Type KD140
TD-20
Trigger Type KD120
TD-12
Trigger Type KD120
TD-9
Trigger Type KD120
TD-4
Pad Type KD120
7