Download Print this page

Roland FD-7 Owner's Manual

Roland fd-7 drum pad: user guide

Advertisement

Quick Links

■ THIS PACKAGE CONTAINS/パッケージに入っているもの:
1. PD-7,PD-9 (PAD)/PD-7、PD-9(パッド)本体
2. Connection Cable/接続ケーブル
3. Owner's Manual (this leaflet)/取扱説明書(本紙)
Please use the PD-7 or PD-9 as a snare/tom/cymbal pad.
To connect the PD-7 or PD-9 to a Roland sound module equipped with a trigger interface (such as the TD-7 or SPD-
11), use the supplied stereo cable. If you use a monaural cable, you will not be able to obtain the rim-shot and
choking techniques.
PD-7、PD-9は、スネア/タム/シンバル・パッドとして使用してください。
TD-7やSPD-11など、ローランド社製のトリガー・インターフェース付き音源と接続するときには 、付属のステレ
オ・ケーブルを使用してください 。モノラル・ケーブルを使用した場合は 、リム・ショット奏法およびチョーク奏
法はできません。
■ PAD DESCRIPTION/PART FUNCTIONS/各部の名称と機能
A Pad Head/打面(ヘッド部)
B Pad Rim/打面(リム部)
C Polarity Switch/ポラリティー・スイッチ
For a detailed explanation about this function, see page 4.
機能については別項をご覧ください。
D Output Jack/アウトプット・ジャック
E Stand Fixing Screw/スタンド取り付けネジ
As shown below, you can attach the PD-7 or PD-9 to a drum stand in two different ways. To change the angle for
inserting the rod, first loosen the Stand Fixing Screw and then rotate the eyebolt by degrees.
図の様に、ドラムスタンドのロッドに2通りの取り付け方ができます。ロッドの差込み方向を変えるときは、いった
んスタンド取り付けネジをゆるめてからアイボルトを90°回転してください。
Method A
NOTE
If you use method B, do not try to insert the rod into the eyebolt by force, as it will not go any further than a
predetermined point.
ご 注 意 (B)の取り付け方をするとき、ロッドはある長さ以上は差し込めないようになっていますので 、無理やり差し込ま
ないようにしてください。
■ SPECIFICATIONS/スペック
Dimensions
PD-7
Dimensions
PD-9
Eyebolt
アイボルト
7-9/16 (W)× 9-1/16 (D)× 2-9/16 (H) inches
寸 法
192 (W)× 230 (D)× 65 (H) mm
Weight
1 lb 13 oz
重 量
800 g
10 (W)× 11-1/2 (D)× 2-11/16 (H) inches
寸 法
254 (W)× 292 (D)× 68 (H) mm
Weight
3 lbs 9 oz
重 量
1600 g
E
Method B
–1–
A
B
C
D
26055321
'98-9-A4-81S

Advertisement

loading

Summary of Contents for Roland FD-7

  • Page 1: Specifications

    Please use the PD-7 or PD-9 as a snare/tom/cymbal pad. To connect the PD-7 or PD-9 to a Roland sound module equipped with a trigger interface (such as the TD-7 or SPD- 11), use the supplied stereo cable. If you use a monaural cable, you will not be able to obtain the rim-shot and choking techniques.
  • Page 2 Sensor) may deteriorate. At the appropriate time, these parts should be replaced. Component parts are available at the retailer from whom you have purchased your KD-7. For details, contact the authorized Roland distributor or local Service Station in your country.
  • Page 3 You can adjust the travel of the pedal by changing the length of the Rod. ロッドの長さを変えることで、踏み込み量を変えることができます。 NOTE When the FD-7 is not going to be used for a long period of time, set the Rod as shown fig b. Do not leave the FD-7 for a long time with the Pedal Plate depressed. ご注意...
  • Page 4: Important Notes

    ● While playing the KD-7, please be careful so as not to get anything caught between the pad face and the beater. ● While playing the FD-7, please be careful so as not to get anything caught under the pedal plate.

This manual is also suitable for:

Kd-7Pd-9Pd-7