Disconnect the sound module before moving to do so). Refer all servicing to your retailer, Do not place containers the nearest Roland Service Center, or an the unit containing liquid on this product. authorized Roland distributor, as listed on the Before you move the unit, Never allow foreign objects (e.g.,...
Getting Started Main Features • Snare/tom pad with mesh head allowing for excellent feel, dynamics and low level acoustics sound. • Rim shots and playing with brushes is possible. • The pad can mount on a V-Drums drum stand and/or commercially available tom stands (vertical rod type or horizontal pipe type p.
Mounting the Pads Mounting the PD-128S Mounting the PD-128 or 108 (Dedicated Snare Pad) on a Tom Stand The PD-128S (dedicated snare pad) has no mounting The PD-128/108 can be attached to a stand that has bracket so can only be used with a snare stand. either a vertical rod or a horizontal pipe.
Connecting to the Percussion Sound Module Use the included stereo cables to connect pads to your Recommended Parameter Settings percussion sound module (sold separately). Connect the L-shaped end of the cable to the pad’s Below please find recommended trigger parameter OUTPUT jack.
Connecting to the Percussion Sound Module Adjusting the Head Tension TD-9 Model name Trigger type PD-128S PD125 Before playing, you must adjust the pad tension first. PD-128 PD125 You can tune/adjust the head tension as you would with PD-108 PD105 an acoustic drum, to get the same dynamic “feel.
For replacement heads or to have the hoop rubber Loosen all tuning bolts, and remove the hoop replaced, please contact your dealer or a Roland service and head. center. Hoop...
Page 9
Connecting to the Percussion Sound Module Pull the fastening clip upward and out, and Install the frame in the shell. remove the covering. The frame’s output jack will be pointing in the same direction as the bracket. Fastening Clip Output jack Covering Protrusion Frame...
Playing Methods Head Shots Change the Nuance of the Rim Shot Only playing the head and with certain snare sounds, the playing position will Only with the TD-30/TD-20X/TDW-20/TD-20/TD-12 change the sound’s nuance. With certain snare and tom sounds, slight changes in the Head way you play rim shots changes the nuance.
Specifications PD-128S PD-128 PD-108: V-Pad PD-128S PD-128 PD-108 Pad size 12 inches 12 inches 10 inches Trigger 2 (Head, Rim) Bracket — 358 (W) x 322 (D) x 117 (H) mm 358 (W) x 368 (D) x 117 (H) mm 307 (W) x 317 (D) x 117 (H) mm Dimensions 14-1/8 (W) x 12-11/16 (D) x 4-5/8 (H) inches...
Page 13
Hive 2, 1530 Arlington Business Park, Theale, Reading, Berkshire. RG7 4SA United Kingdom Roland Service Centers and Distributors Roland Service Centers and Distributors When you need repair service, access this URL and nd your nearest Roland Service Center or authorized Roland distrib your country. https://roland.cm/service...