System Menus - Uniden BW6141R Series Owner's Manual

Feeding Reminder
Set up a reminder alert to feed your baby, or to feed the baby on scheduled time.
1. Press the MENU button on the monitor, and select
2. Press UP and DOWN direction buttons to select between 4 time options, and
press OK to set the alert time.
3. When setting up the feeding time, press LEFT and RIGHT direction buttons
to change options between hour, minute, second and On/Off; press UP and
DOWN direction buttons to change values or toggle the On/Off switch.
4. Press OK to save settings. You can set up to 4 feeding alert for one day. And
when the set time is up, a feeding alert icon will appear on the screen.
Humiture Detection
The baby monitor is able to provide ambient room temperature and humidity level
around the camera as a reference only. If the temperature or humidity falls outside
of a preset range, the system alerts you. Temperature and humidity alert range lets
you set that range.
1. Press the MENU button on the monitor, and select
2. Press UP and DOWN direction buttons to select options between temperature
range, humidity range and out of range reminder, and press OK to confirm
selection.
3. Press LEFT and RIGHT direction buttons to change options, and press UP and
DOWN direction buttons to change values and units.
4. Press OK to save settings.
5. For Out of range reminder option, select to turn on or off the alarm when the
temperature and humidity are out of range.
# Please note that the temperature and humidity indicated in this way should
be used only as a reference, not as an accurate measurement. For a proper
measurement, please use a thermometer or humidity sensor.
16
SYSTEM MENU
> Feeding Reminder.
> Humiture Detection.