Table of Contents
Advertisement
Voice activated (Vox)
Select to monitor significant sound with reduced ambient noise.
The screen goes off in "Vox" mode if there is no significant sound
louder than a certain level within 1 minute. Meanwhile, the monitor
screen turns on as soon as detecting sound around the camera. In
"Vox" mode, you can set the sensitivity with [
• H(High) : Sets to higher sensitivity.
• L(Low) : Sets to lower sensitivity.
Camera/Sleep
Press camera icon once to go to the next camera.
1.
Press and hold for 3 seconds to turn on the sleep mode. Your
2.
monitor will continue to detect sound around the camera. Press
any button to turn the screen on again.
If camera is disconnected, monitor screen would be turned on
automatically in Sleep mode.
out of range
If the camera and monitor are not paired or if the monitor is outside
of transmission range with the paired camera, the "out of range"
message appears with warning beeps at regular intervals.
Two-way talk
Press the [TALK] button while talking.
] in menu.
SEW-3036W
TALK
Sound level
The louder the sound around the camera, the more LEDs turn on.
Portable monitoring
Slide the belt clip upwards to use the integrated belt clip on the
monitor. When not in use, please push the clip back to its original
position.
Night Light
Press the [
] button on the camera or
press and hold the [
] button for 3 seconds on
the monitor to remotely activate or deactivate the
night light on the camera.
remote PTZ and Zoom
You can remotely control the camera to pan, tilt and digital zoom.
Use [ $ / % /_/ + ] buttons on the wireless monitor to control the camera.
Use [
] button to zoom in and out.
DC IN 6V
[Camera]
[Monitor]
English · 7
Advertisement
Table of Contents
