TP-Link VIGI NVR1016H User Manual page 13

Chapter 1
4. Set the recording schedule according to your needs. By default, the settings are applied to all
cameras managed by the NVR. Click Next.
Turn on 24-Hour Continuous
Recording
Turn on 24-Hour Motion
Detection Recording
Enable Loop Recording
Long-term Storage (Only for
VIGI NVR1016H)
Expected Recording Time
(Only for VIGI NVR1016H)
All of the cameras will be set to record continuously (24/7).
The camera starts to record when a motion is detected.
Click the check box to overwrite the oldest recording files
with the latest one when the hard drive is full.
Click the check box to reduce the size of the video and
maximize recording storage.
Note: If you have enabled Plug and Play, this function cannot
be enabled.
Select the recording time you expect.
Get Started
9