Rear Panel; Led Indicators - D-Link DGS-1100-05PDV2 User Manual

1 Product Introduction

Rear Panel

Power: Input for a 54V/1.574A AC adapter.
Kensington Lock: This is used to attach a physical Kensington security lock.
GND: This is used to connect the Switch to ground.

LED Indicators

The Switches feature LED indicators for Power and Link/Act for each port. The following shows the LED
indicators for the DGS-1100-05V2/05PDV2/08V2/08PV2 switches along with an explanation of each
indicator.
Location Indicator LED
Power
Per Device
PoE Max.
(Only DGS-1100-
08PV2)
LED Per
10/100/1000 Link/Act/Speed
Mbps Port
CAUTION: The equipment power supply cord shall be connected
to a socket-outlet with earthing connection.
Le cordon d'alimentation de l'équipement doit être branché
sur une prise de courant dotée d'une connexion à la terre.
Figure 1.8 – DGS-1100-08PV2 Rear Panel
NOTE: The power budget is 64 Watts for DGS-1100-08P.
Figure 1.9 –LED Indicators on DGS-1100 series
Color
Green
Red
Green/Amber
D-Link Smart Managed Switch User Manual
Status Description
Solid Light The device is powered on.
PoE Pass Through Off (DGS-1100-
Blinking
05PDV2 only)
Light off The device is powered off.
When the power output to PDs is over
Solid Light 57W. No additional PDs can be
powered for safety consideration.
If the user unplugged certain PDs and
made the PoE power budget left over
Blinking
7W, the PoE MAX LED will blink 5
seconds.
When the power budget is using less
Light off
the 57W.
Indicates there is a 1000 Mbps
Solid Green
connection on this port.
Blinking Indicates data is being processed on
Green this port at 1000 Mbps.
6