Installing Power Supply Units - Dell C7004/C150 Installing And Maintaining

PoE Ports per Power Supply 1600W-AC at Lowline
Power Supply Units
1
2
3
4
5
6
7
8
Power Over Ethernet Plus (PoE+)
The C-Series can transmit power to Ethernet devices over the signal pairs of an Shielded Twisted Pair
(UTP) cable. A maximum of 30.0 Watts (at 53 Volts) can be transmitted over a link. The chassis transmits
power to connected IEEE 802.3at-compliant devices via ports that are enabled with PoE+. The higher
power of PoE+ (30W/port) is available only with Power Supply 1600W-AC and the PoE+ line card.
Table 7-2. Maximum PoE+ Ports Support
Power Supply Units
1
2
3
4
5
6
7
8

Installing Power Supply Units

WARNING: Use only the AC power cord supplied with the AC power supply. Do not supply power to your
C7004/C150 system until the power supplies and fan tray are installed, and RPMs and line cards have been
installed.
NOTE: For system input power requirements see
32 | Installing Power Supply Units
Max PoE Ports
24
32
(System Redundancy)
110
188
192
PoE Redundancy
N/A
N/A
Max PoE+ Ports
Power Supply 1600W-AC
at highline
24
30
(System Redundancy)
83
136
190
192
N/A
N/A
Power Supply 1600W-AC
at lowline
12
16
(System Redundancy)
56
96
136
176
N/A
N/A
System Power Specifications on page 62.