Setting A Programme; Adjusting The Programme Set- Tings; Loading Laundry - Siemens WAU28S42ES User Manual And Assembly Instructions

Table of Contents

Advertisement

a The appliance performs an audible
function test in the detergent
drawer.
→ "Noise", Page 55

Setting a programme

Set the programme selector to the
1.
required "programme" → Page 26.
If necessary, "adjust the pro-
2.
gramme settings" → Page 37.
Adjusting the programme set-
tings
Depending on the programme and
programme progress, you can adjust
or activate/deactivate the settings.
Note: Overview of all programme set-
tings:
→ "Buttons", Page 24
Requirement: A programme has
been set.
Adjust the programme settings.
The programme settings are not
saved permanently for the pro-
gramme.
Note: The setting is saved if you ac-
tivate or deactivate the intelligent
dosing system.

Loading laundry

Notes
¡ Please read the information in the
"Safety" → Page 4 and "Preventing
material damage" → Page 11 sec-
tions to ensure that you use the
appliance safely.
¡ To prevent creasing, take note of
the maximum load for the relevant
"programme" → Page 26.
Requirement: Prepare and sort the
laundry.
→ "Laundry", Page 33
Open the door.
1.
Ensure that the drum is empty.
2.
Separate the laundry and place it
3.
in the drum.
Note: Ensure that there is no laun-
4.
dry trapped in the door.
Close the door.
Basic operation en
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wau28s42es/01

Table of Contents