Pioneer PDP-503CMX Service Manual page 125

GSO:
Output data to be related to various established state
(OPTION item of menu mode / integrator menu)
• Transmit data according to transmission order and size of the table below.
• Except each normal operation mode / RS-232C integrator adjustment / RS-232C factory adjustment mode, command is invalid.
Order Data Contents
1 POWER CONTROL
2 OSD display
3 FULL MASK
4 R SIDE MASK LEVEL
5 G SIDE MASK LEVEL
6 B SIDE MASK LEVEL
7 MASK CONTROL
8 ORBITER MODE
9 INVERSE MODE
10 COLOR MODE
11 MIRROR MODE
12 FAN CONTROL
13 MONITOR NAME
14 SLOT INPUT
15 TEMPERATURE
16 HOUR METER
17 KEY LOCK
(Note 1) Output dummy data (*) in inside SLOT connection.
PDP-503CMX, PDP-503MXE, PDA-5002
Size Output
3 byte Same as the RS-232C command
0: OSD display prohibition
1 byte
1: OSD display permission
3 byte
3 byte Adjustment value
3 byte Adjustment value
3 byte Adjustment value
1 byte 0: OFF, 1: ON
1 byte 0: OFF, 1: ON
1 byte 0: OFF, 1: ON
1: COLOR MODE1
1 byte
2: COLOR MODE2
X: Right and left inverting
Y: Top and bottom inverting
1 byte
Z: Top and bottom right and left inverting
N: OFF
A: AUTO
1 byte
M: MAX
12 byte
0: VIDEO (RGB)
1 byte 1: COMPONENT1
2: COMPONENT2
3 byte A/D input value
5 byte
0: Lock release
1 byte
1: Lock
Remarks
Display a RS-232C command
of set MASK currently
(Note 1)
(Note 2)
Unit : H
125